CERTIFICATIONS:
MID
EN1434
2014/32/EU
LoRaWAN

ADVANTAGES:
Flexible counter configurations.
Accounting parameters can be set by users:
select the necessary units of measurement;
set the place of installation (return or supply);
configure pulse inputs and outputs;
manage computing modules.
Heating and cooling energy is collected in different registers
Possibility of annual or monthly reports
Possibility of registration of maximum and average monthly values of parameters
Setting the characteristics of the coolant
The electronic unit can be installed separately from the flow measurement part
The flow sensor can be installed in any position
Possibility of choosing a tariff for measurement
Communication modules: MBus, W-MBus 868 MHz (built-in only), ModBus, LoRa, BACnet

SPECIFICATION:
MID DN15-DN100
Ultrasonic flow measurement of coolant
Pulse inputs / outputs are universal
WMBUS modes manufacturer’s protocol (two-way), Wireless MBus S1 and T1 modes
Communication modules
Combined variants of communication modules. MBus, RF, MBus and RF. Connection of additional modules: ModBus / BACnet / Bus / CL / MiniBus / Lora

Запис Ultrasonic heat and cooling meter LoRaWAN Axioma QALCOSONIC E3 (DN15-DN100) спершу з'явиться на Polymetrica.

* – Qalcosonic W1 version for Belgium, Netherlands, France, Germany, Denmark, Norway, Finland, Poland, Sweden.

A static method of measuring water flow, without the use of moving parts

High-precision measurement of water flow

Avoids measurement deviations caused by sand, sediment or air plugs

Long-term stability and reliability of measurements 9-digit, multi-line LCD display. Display of the total volume and instantaneous consumption

Sensitive and accurate at low consumption, up to 1 l/h.

Prepared for remote data transfer to AMR systems via NFC, wM-Bus, LoraWAN, NB-IoT technologies.

READY FOR REMOTE DATA TRANSFER

• wM-Bus 868 MHz OMS T1

• LoRaWAN (EU863-870, IN865-867)

• NB-IoT (CoAP)

• NFC CERTIFICATES

MID (2014/32/EU)

LoRaWAN Conformity Certificate

OMS Certificate of Conformity

WRAS (Great Britain)

ACS (France)

ICIM (Italy)

KIWA (Netherlands)

TECHNICAL DATA

Temperature class T30, T50, T30/90, T90

Nominal consumption 1.6 / 2.5 / 4.0 m³/h

Wide measurement range Q3/Q1 = R 80/160/250/315/400/500/800 (optional)

There is no need for a direct section of the pipeline before and after the meter

Can be mounted in any position (horizontally, vertically, at an angle)

Does not measure air

Environmental class E2/M1

Protection class IP68

Nominal pressure PN16

Internal data logger

Maintenance-free, battery life up to 16 years * depending on remote data settings

Measures flow in both directions

Indicates the direction of the flow

Setting the counter parameters and reading archives is carried out via NFC or an optical interface

Strong composite body Units of measurement: m³-m³/h.

Запис Smart ultrasonic water meter Axioma QALCOSONIC W1 (DN25-DN50) спершу з'явиться на Polymetrica.

Ultrasonic water meter QALCOSONIC F1 (IP68) is designed for measuring consumption of cold and hot water in households and multi-apartment buildings, as well as in industry.

ADVANTAGES

Static water meter using ultrasonic technology

Very accurate

For home and commercial use

For hot and cold water

APPROVAL

MID

EN 14154

AUTOMATIC METER READING (AMR) INTERFACES, OPTION

M-Bus CL module MODBUS RS485 module

WM-BUS RF868 MHz module

Bucknet

LAURA SPECIAL CHARACTERISTICS

Temperature class T30, T30/90, T90

Diameters: DN 50, DN 65, DN 80, DN 100

Nominal consumption 16 / 25 / 40 / 63 / 100 m 3 /h.

Dynamic range to Q3/Q1 = R 250/400

There is no need for a direct section of the pipeline

Does not measure air

Environmental class B/C

Protection class IP68

Nominal pressure PN 25 bar

Internal data logger

Battery life > 16 years

Power options: battery/external power

Additional communication modules

Measures countercurrent (for additional recorder)

Indicates the direction of the flow.

Запис Ultrasonic water meter Axioma QALCOSONIC F1 IP68 (DN50-DN100) спершу з'явиться на Polymetrica.

* – Qalcosonic W1 version for Belgium, Netherlands, France, Germany, Denmark, Norway, Finland, Poland, Sweden.

A static method of measuring water flow, without the use of moving parts

High-precision measurement of water flow

Avoids measurement deviations caused by sand, sediment or air plugs

Long-term stability and reliability of measurements 9-digit, multi-line LCD display. Display of the total volume and instantaneous consumption

Sensitive and accurate at low consumption, up to 1 l/h.

Prepared for remote data transfer to AMR systems via NFC, wM-Bus, LoraWAN, NB-IoT technologies.

READY FOR REMOTE DATA TRANSFER

• wM-Bus 868 MHz OMS T1

• LoRaWAN (EU863-870, IN865-867)

• NB-IoT (CoAP)

• NFC CERTIFICATES

MID (2014/32/EU)

LoRaWAN Conformity Certificate

OMS Certificate of Conformity

WRAS (Great Britain)

ACS (France)

ICIM (Italy)

KIWA (Netherlands)

TECHNICAL DATA

Temperature class T30, T50, T30/90, T90

Nominal consumption 1.6 / 2.5 / 4.0 m³/h

Wide measurement range Q3/Q1 = R 80/160/250/315/400/500/800 (optional)

There is no need for a direct section of the pipeline before and after the meter

Can be mounted in any position (horizontally, vertically, at an angle)

Does not measure air

Environmental class E2/M1

Protection class IP68

Nominal pressure PN16

Internal data logger

Maintenance-free, battery life up to 16 years * depending on remote data settings

Measures flow in both directions

Indicates the direction of the flow

Setting the counter parameters and reading archives is carried out via NFC or an optical interface

Strong composite body Units of measurement: m³-m³/h.

Запис Smart ultrasonic water meter Axioma QALCOSONIC W1 (DN15-DN25) спершу з'явиться на Polymetrica.